Arometrix FRACTION FINDER Panduan Pengguna - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Laboratorium Arometrix FRACTION FINDER. Arometrix FRACTION FINDER 17 halaman.
Section 1: Overview
The FRACTION FINDER is Arometrix's real-time molecular monitoring system for botanical processing. The
technology utilizes fluorescence spectroscopy to detect and measure molecules in real-time. Knowing the
flow and the relative concentration of botanical molecules, and whether that intensity is increasing, or
decreasing can help operators make optimal process decisions. In our work, we found processors were
proudest of their craft when they could get the purest, most consistent batches. It is with this goal in mind
that the FRACTION FINDER was developed.
The ability to directly track molecules of interest during the process comes with a few key benefits:
●
The data to improve purity and reduce by-products
●
The information to improve process techniques and enhance process repeatability
●
The ability to quickly train staff and have run traceability
What the FRACTION FINDER is not:
The FRACTION FINDER is not a quantitative measure. It provides qualitative process information that
directly tracks the relative concentration of Cannabinoids. It is Arometrix's goal to amass enough spectral
data from the FRACTION FINDER to eventually be able to determine quantitative purity in the future.
The FRACTION FINDER cannot replace good laboratory practice and experience. The FRACTION FINDER's
data, in combination with temperature, vacuum, good laboratory practice, and experience will help
technicians further perfect their craft.
Section 2: Fundamentals
The FRACTION FINDER is composed of two key components: the sensor and the monitor.
Sensor:
The sensor contains the "eyes" of the system". The sensor is mounted on size 29 or 34 glass,
depending on the sensor size option ordered. Adapters are also available to install the sensor on smaller
glass, such as size 24 glass.
Monitor:
The monitor contains the "brains" of the system. This 10" monitor consists of a compute
module that creates a visualization for the user where both flow and relative potency are deduced. The
monitor has a stand.
Note: This unit is intended for lab use. Care should be taken not to spill anything on it, as it is not waterproof.
Section 3: Unpacking and Inspecting
After the instrument is received, it should be carefully unpacked and inspected for damage during
shipment and to confirm that all components are present.
Each FRACTION FINDER 2018 - 2021 comes with:
● Fraction Finder Sensor (Size 29 or 34)
● Arometrix Monitor
● Pole mounting bracket screw
● Sensor Cable, USB
Arometrix, Inc.
arometrix.com/resources
3