3D Systems Cubify CUBEX Duo Manual Penggantian - Halaman 7
Jelajahi secara online atau unduh pdf Manual Penggantian untuk Printer 3D 3D Systems Cubify CUBEX Duo. 3D Systems Cubify CUBEX Duo 13 halaman. Replacing a main board pcb
Juga untuk 3D Systems Cubify CUBEX Duo: Manual Penggantian (17 halaman), Manual (10 halaman), Manual (10 halaman)
Halaman Cetak
Installing the new print jet
1. Check your Print Jet is assembled and that the print tip moves freely when
pushed in and out of the drive. The Print tip moves freely for the levelling
process. Once the levelling process has been completed the Print tip will be
locked off.
If your Print Jet and print tip are not assembled together when you receive them, you
can assemble them by inserting the locating end of the Print tip into the Print Jet as
pictured below.
7