Displays2go TVTRUSS74 Petunjuk Perakitan - Halaman 2
Jelajahi secara online atau unduh pdf Petunjuk Perakitan untuk Rak dan Dudukan Displays2go TVTRUSS74. Displays2go TVTRUSS74 2 halaman. This stand will accomodate lcd screens up to 50” diagonal.
Halaman Cetak
Step 4.
Place O-Rings (G) on rails.
Spread O-rings on each
rail apart so they will
not interfer with LCD
mounting.
Step 6.
Mount Brackets (F) to back of LCD
screen using hardware (I) and hex wrench (H)
provided.
Hooks on brackets to point down as shown.
Step 7.
With two people, lift LCD screen and
hook brackets on rails as shown.
Check to ensure LCD screen is centered
on rails. and all four hooks are engaged
to rails. Tighten lock bolts to secure screen.
Slide O-rings up against each side of LCD
brackets.
Truss Bracket
Step 5.
Place Rails (E) on truss brackets.
Rotate brackets so they extrend
straight out from truss. Rotate
rails and place top rail in slot
Rotate bottom rail into slot.
Loosen bottom rail holder on
both brackets and slide down
to engage bottom rail. Tighten
screw.
Page 2 of 2
Rail Holder
O-Rings