Displays2go TVTRUSS74 조립 지침 - 페이지 2
{카테고리_이름} Displays2go TVTRUSS74에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Displays2go TVTRUSS74 2 페이지. This stand will accomodate lcd screens up to 50” diagonal.
페이지 인쇄
Step 4.
Place O-Rings (G) on rails.
Spread O-rings on each
rail apart so they will
not interfer with LCD
mounting.
Step 6.
Mount Brackets (F) to back of LCD
screen using hardware (I) and hex wrench (H)
provided.
Hooks on brackets to point down as shown.
Step 7.
With two people, lift LCD screen and
hook brackets on rails as shown.
Check to ensure LCD screen is centered
on rails. and all four hooks are engaged
to rails. Tighten lock bolts to secure screen.
Slide O-rings up against each side of LCD
brackets.
Truss Bracket
Step 5.
Place Rails (E) on truss brackets.
Rotate brackets so they extrend
straight out from truss. Rotate
rails and place top rail in slot
Rotate bottom rail into slot.
Loosen bottom rail holder on
both brackets and slide down
to engage bottom rail. Tighten
screw.
Page 2 of 2
Rail Holder
O-Rings