3D Systems Sense Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemindai 3D Systems Sense. 3D Systems Sense 18 halaman. 3d

SENSE SCANNER SETUP

Unpack and set up your scanner and scanner software before you get started with the basics of scanning.

Included in the box is the Sense 3D scanner with attached USB cable and the Quick Start Guide.

Remove the scanner from the box and plug the USB cable into your computer.

1. Navigate to Cubify.com.

2. Click Cubes+ > Sense.

3. Click Tech Specs.

4. Click Download Software for your operating system.

Follow the instructions to complete the software download and installation.

After the software is installed, you link the scanner to a Cubify account.

When you installed the Sense software, a shortcut was created on your desktop. Use the shortcut to open the application.

Note: If the scanner is not connected to your computer, a message will state "Device not connected." Plug the USB con-

nector for the scanner into the USB port on your computer.

You will then be prompted to activate your Sense 3D scanner.

3D Systems, Inc.