3D Systems Sense 사용자 설명서 - 페이지 6

{카테고리_이름} 3D Systems Sense에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D Systems Sense 18 페이지. 3d

SENSE SCANNER SETUP

Unpack and set up your scanner and scanner software before you get started with the basics of scanning.

Included in the box is the Sense 3D scanner with attached USB cable and the Quick Start Guide.

Remove the scanner from the box and plug the USB cable into your computer.

1. Navigate to Cubify.com.

2. Click Cubes+ > Sense.

3. Click Tech Specs.

4. Click Download Software for your operating system.

Follow the instructions to complete the software download and installation.

After the software is installed, you link the scanner to a Cubify account.

When you installed the Sense software, a shortcut was created on your desktop. Use the shortcut to open the application.

Note: If the scanner is not connected to your computer, a message will state "Device not connected." Plug the USB con-

nector for the scanner into the USB port on your computer.

You will then be prompted to activate your Sense 3D scanner.

3D Systems, Inc.