3D Upfitters External Ventilation Kit Panduan Instalasi - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Printer 3D 3D Upfitters External Ventilation Kit. 3D Upfitters External Ventilation Kit 12 halaman. Air filter & vents
Halaman CetakDIY enclosure. Be sure to delete the dotted construction lines when configuring
the laser or CNC control file.
Notice Air Flow Direction
The fan is powered by a 5V USB power supply built into the filter. Plug in the fan and notice in
which direction the air flows. You'll want to connect the fan to the filter so that the air is pulled
out of the enclosure and through the filter.
Attach the Filter to the Panel
There are two sizes of holes with 3DUPfitters enclosures for 60mm and 80mm fans.
With the larger 80mm-sized holes the screws are inserted from inside the enclosure
and through the nuts slotted into the filter itself as shown below. The filter is mounted
on the outside of the enclosure.
Copyright 2022 3D Upfitters LLC
4