3D Upfitters External Ventilation Kit 설치 매뉴얼 - 페이지 4

{카테고리_이름} 3D Upfitters External Ventilation Kit에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D Upfitters External Ventilation Kit 12 페이지. Air filter & vents

페이지 인쇄

DIY enclosure. Be sure to delete the dotted construction lines when conﬁguring

the laser or CNC control ﬁle.

Notice Air Flow Direction

The fan is powered by a 5V USB power supply built into the ﬁlter. Plug in the fan and notice in

which direction the air ﬂows. You'll want to connect the fan to the ﬁlter so that the air is pulled

out of the enclosure and through the ﬁlter.

Attach the Filter to the Panel

There are two sizes of holes with 3DUPﬁtters enclosures for 60mm and 80mm fans.

With the larger 80mm-sized holes the screws are inserted from inside the enclosure

and through the nuts slotted into the ﬁlter itself as shown below. The ﬁlter is mounted

on the outside of the enclosure.