3D3 Mini A1124 Panduan Pengguna - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kacamata 3D 3D3 Mini A1124. 3D3 Mini A1124 8 halaman.
Halaman Cetakprepare for installation
Ensure that only the projector you wish to use with
the 3D3 Eyewear is switched on.
Set the projector to 3D mode (refer to the projector's
operating instructions).
Stand close to the projector's DLP Link emitter.
charging
When the battery is low, the blue indicator light will
flash for approximately five seconds when switching
on. Connect the supplied cable to the charging port
and the other end to any suitable USB charger or port
on a TV, laptop or desktop computer. The indicator
light will illuminate red until fully charged and then
extinguish.