3D3 Mini A1124 Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} 3D3 Mini A1124. 3D3 Mini A1124 8 pagina's.

prepare for installation

Ensure that only the projector you wish to use with

the 3D3 Eyewear is switched on.

Set the projector to 3D mode (refer to the projector's

operating instructions).

Stand close to the projector's DLP Link emitter.

charging

When the battery is low, the blue indicator light will

flash for approximately five seconds when switching

on. Connect the supplied cable to the charging port

and the other end to any suitable USB charger or port

on a TV, laptop or desktop computer. The indicator

light will illuminate red until fully charged and then

extinguish.