Altman GALLERY SERIES Panduan Memulai Cepat - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Peralatan Pencahayaan Altman GALLERY SERIES. Altman GALLERY SERIES 20 halaman.

Gallery Series

Beam Wash Models

Beam wash models offer a variable beam angle of 15 to 60 degrees and a end of lens accessory holder

(see

"Accessory Holder - All Models" on page 19

Beam Angle Adjustment

Gallery Series LED Luminaires that have the beam wash lens are designed and are ideal to project a soft

edge, even beam of light. For beam wash models, beam shaping is achieved through external, four-flap

barn doors (sold separately).

To adjust the beam angle, simply loosen, do not remove, the beam angle knob as illustrated in Figure 15.

Once the desired angle is achieved, re-tighten the beam angle knob.

Note: Keeping the beam angle knob loose and slightly snug will allow smooth movement of the

lens along the lens tube when making adjustments. Loosening the knob too much will make fine/

precision adjustments difficult and may misalign the lens.

Flood Models

Flood models offer a fixed beam angle of 85 degrees and a end of lens accessory holder

All Models" on page

ing is achieved through external, four-flap barn doors (sold separately).

Page 18

Beam Angle Knob

Figure 16: Beam Wash Models - Beam Angle Adjustment

19) below for more information on the accessory holder). For flood models, beam shap-

for more information on the accessory holder).

Beam Wash Setting

Spot Position (15° Degrees)

Altman Gallery Beam Wash

Front of Luminaire

Flood Position (60° Degrees)

Altman Gallery Beam Wash

Front of Luminaire

Quick Start Guide

("Accessory Holder -