CAME BPT MTMA/GSM Manual Pemrograman - Halaman 4

Jelajahi secara online atau unduh pdf Manual Pemrograman untuk Unit Kontrol CAME BPT MTMA/GSM. CAME BPT MTMA/GSM 16 halaman. Audio gsm module for modular plate

Halaman Cetak

OPERATIONS THAT CAN BE CARRIED OUT FROM THE TELEPHONE

During the conversation between the telephone and the entry panel, it is possible to carry out the following operations using the

telephone keypad:

Increase the speaker volume

Lower the speaker volume

Activate the solenoid lock

Adjusting the speaker volume (for call in progress)

If during the conversation the person you are talking to cannot hear your voice at the right volume, you can increase the speaker

volume by pressing key

Adjusting the microphone volume (for call in progress)

If you can't hear the voice of the person in front of the audio entry panel, you can press key

the sensitivity of the microphone.

PROGRAMMING VIA SMS

Programming via SMS requires the sending of individual SMS composed in such a way as to contain the information required to

programme the entry panel.

Access to the entry panel is password protected; the factory settings set the password at "0000".

General information on the composition of a programming SMS

The text of a valid programming SMS starts with the password assigned to the entry panel.

For example, if the access password is still the default one:

0 0 0 0

One or more commands to programme the device can be added to this sequence; each command or sequence of commands

message must end with the symbol

The different types of commands are identified by a numerical code. If the commands are for the purpose of setting parameters,

each of the data items to be set is preceded by the character

Each command can be sent in an individual SMS and must be preceded by the symbol

For example if you want to change the default password (0000) for a new password (1234), the command code is 10 and the

SMS to key in is:

0 0 0 0 # 1 0 . 1 2 3 4 #

, or lower it by pressing key

1 2 3

4 5 6

7 8 9

0 #

(see table of commands).

Increase the microphone volume

Lower the microphone volume

Activate the entry panel on-board relay

to increase or key

End the call

to reduce