CAME BPT MTMA/GSM Manual Pemrograman - Halaman 5
Jelajahi secara online atau unduh pdf Manual Pemrograman untuk Unit Kontrol CAME BPT MTMA/GSM. CAME BPT MTMA/GSM 16 halaman. Audio gsm module for modular plate
Halaman CetakAlternatively, an individual SMS can contain a series of commands, each preceded by the symbol
of the SMS does not exceed the maximum number of characters permitted for a single SMS.
If the programming SMS contains more than one parameter, these must always be preceded by the symbol
Example of SMS with chain of numerical commands and parameters:
0 0 0 0 # 2 0 . 1 . 1 . 3 4 7 1 2 3 4 5 6 7 # 2 0 . 1 . 2
. 3 3 3 2 3 4 5 6 7 8 # 2 1
If there is some text amongst the command parameters, it must be written between the characters
Example of SMS with chain of commands containing numerical parameters and text labels:
0 0 0 0 # 2 0 . 1 . 1 . 3 4 7 1 2 3 4 5 6 7 # 2 2 . 1 .
" C A M E G R O U P " # 2 1
If you want to use a command that is for setting various miscellaneous parameters (for example, the command that sets the ring
time and conversation time), leaving one of the values unchanged, you must compose the SMS leaving empty fields in the space
reserved for the parameters that are not to be changed (
Example of SMS in which the command requires the setting of two parameters and you want to programme only the second of
the two, leaving the first unchanged:
0 0 0 0 # 5 0 .
To know the outcome of sending one or more commands to the entry panel, enter the character
command(s), before the symbol
Example of programming SMS with request for outcome for the first parameter programmed:
0 0 0 0 # 2 0 . 1 . 1 . 3 4 7 1 2 3 4 5 6 7 ? # 2 2 . 1 .
. " C A M E G R O U P " #
The message received in response to the SMS in the example can have 3 different outcomes and, therefore, contents:
20OK = The command has been received and carried out correctly,
20E1 = The command contains wrong parameters,
20E2 = The command has not been carried out.
For commands that require a reply SMS (e.g. request for GSM signal strength or request for firmware version of connected mod-
ules), enter character
?
at the end of the command and before symbol
Example of SMS that requires a reply SMS:
8 0 ? #
.
. 6 0 #
#
.
#
....
#
....
).
.
#
.
, on condition that the length
#
.
.
.
" "
?
at the end of the desired
.