Divesoft ODA Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Instrumen Selam Divesoft ODA. Divesoft ODA 16 halaman.

Placement

Slide the included ODA holder into the rail on the DSV or BOV of your Liberty . ODA can be

installed on both the left and right eye, which is a matter of personal preference .

Everyone has their dominant eye, which they perceive more naturally . The dominant eye can

be independent of whether you are right-handed or left-handed . If you do not know which is

your dominant eye, try which position of ODA suits you better and you feel more natural and

comfortable when watching it .

If you need to replace the ODA location side, you must unscrew the top hinge securing the ODA

and screw it to the opposite side of the holder's arm .

If necessary, you can flip the ODA display . Go to Setup / Preferences / Indication / HUD right/

left .

Adjust the position of the ODA so that it is in your field of view and at the same time does not

excessively obstruct the view and does not collide with your diving mask . Pay close attention

to the setting of the ODA angle to your eye . The angle has a major effect on the display of the

entire ODA display .

The distance of the eyepiece from the eye should be approximately 4 cm (about 1 1/2 inch) .