Camille Bauer SINEAX CAM Panduan Petunjuk Pengoperasian - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Alat Ukur Camille Bauer SINEAX CAM. Camille Bauer SINEAX CAM 19 halaman. Graphic display for sineax cam
Juga untuk Camille Bauer SINEAX CAM: Panduan Petunjuk Pengoperasian (12 halaman)
Halaman Cetak
4.4 Display meter contents
4.5 Measurements of I/O's and relays
For each channel of analog output modules the
output value and the channel text is displayed.
For each channel of analog input modules the
scaled measurement and the channel text is
displayed.
For each existing I/O module one page is
shown, followed by the view of the relay states.
11
Meter contents are acquired for both the
measured system as well as for analog inputs.
For digital inputs it takes place only if the inputs
are configured as meter inputs.
Meters
For each meter the contents for high tariff (HT)
and for low tariff (LT) are displayed. If the tariff
switching is not active for the meters, no value
will be shown for LT. The selection of the meter
is performed via
the key
(>1s) resets the displayed meter
contents.
For each channel of digital input or output modules
the output value and the channel text is displayed.
For each relay output the present position of the
switching contact is shown.
The selection of the display page is done using
the keys
and
and
. A long pressing of
.