Camille Bauer SINEAX CAM 사용 설명서 - 페이지 11

{카테고리_이름} Camille Bauer SINEAX CAM에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Camille Bauer SINEAX CAM 19 페이지. Graphic display for sineax cam
Camille Bauer SINEAX CAM에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지)

페이지 인쇄

4.4 Display meter contents

4.5 Measurements of I/O's and relays

For each channel of analog output modules the

output value and the channel text is displayed.

For each channel of analog input modules the

scaled measurement and the channel text is

displayed.

For each existing I/O module one page is

shown, followed by the view of the relay states.

Meter contents are acquired for both the

measured system as well as for analog inputs.

For digital inputs it takes place only if the inputs

are configured as meter inputs.

Meters

For each meter the contents for high tariff (HT)

and for low tariff (LT) are displayed. If the tariff

switching is not active for the meters, no value

will be shown for LT. The selection of the meter

is performed via

the key

(>1s) resets the displayed meter

contents.

For each channel of digital input or output modules

the output value and the channel text is displayed.

For each relay output the present position of the

switching contact is shown.

The selection of the display page is done using

the keys

and

. A long pressing of