3DUpFitters CR-10 Smart Enclosure Kit Panduan Instalasi - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Printer 3D 3DUpFitters CR-10 Smart Enclosure Kit. 3DUpFitters CR-10 Smart Enclosure Kit 19 halaman.

Halaman Cetak

7. Attach Front Display

You can choose to leave the display attached to the printer or move it outside.

First, detach the display from the printer and unplug the cable in the back.

Unfortunately the cable is just a tad short to

reach to the display outside of the

enclosure, so we've included an extension

cable.

Next attach the display holder using two

M4 12mm screws.

Attach the display cable extender, work the

cable through the slit, and attach it to the

display on the outside of the enclosure.