Divus KNX SUPERIO Panduan Memulai Cepat - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Panel sentuh Divus KNX SUPERIO. Divus KNX SUPERIO 20 halaman.

When commissioning KNX SUPERIO, the fol-

lowing steps must be followed:

˚ Power off the system/installation

˚ Install KNX SUPERIO on the installed moun-

ting unit

˚ Connect power supply and KNX bus to

KNX SUPERIO

˚ Power on the system/installation

˚ Wait until KNX SUPERIO has booted up

2.3.2 ENVIRONMENTAL CONDITIONS

The correct function of KNX SUPERIO can be granted only if the following requests are met:

OPERATION

2.3.3 COMMISSIONING

DIVUS KNX SUPERIO is power supplied by

230V AC

ATTENTION!

If the KNX SUPERIO hardware is

changed, irreversible damage can occur.

Any intervention on the equipment should

be performed only by authorized person-

nel of DIVUS.

Ambient temperature 0°C - 30°C

ATTENTION!

Before commissioning KNX SUPE-

For the usage/configuration of KNX-

SERVER a working network connection is re-

RIO all connections must be checked! Ve-

quired. In order to make the first access to

rify that the voltage of the connected po-

KNXSERVER, or if a compatible network is not

wer supply doesn't exceed the supported

available, follow these steps:

voltage range, in order to avoid damage

on the device!