Divus KNX SUPERIO Panduan Memulai Cepat - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Panel sentuh Divus KNX SUPERIO. Divus KNX SUPERIO 20 halaman.

Halaman Cetak

2.4 MAINTENANCE / WARRANTY

DIVUS KNX SUPERIO is completely fanless

and has no moving parts. The industry-tested

hardware, the reduced size and minimal power

consumption make it ideal for home automati-

on. The touch panel does not require any com-

plicated installation or maintenance and there

are no special requirements on the installation

location.

The touch panel has 24 months warranty from

date of delivery (date of the delivery docu-

ment). This can only be maintained if the de-

vice is shipped back for reparation in its original

packaging, with all the shock-absorbing parts

To be noticed:

Each repair shipment must be approved by

our technical support. Please contact us using

2.5 NETWORK CONNECTION

For the usage/configuration of KNX SUPERIO

a working network connection is required. In

order to make the first access to KNX SUPE-

RIO, or if a compatible network is not available,

follow these steps:

˚ Connect KNX SUPERIO through a crossed

network cable ("crossover-cable") with your

˚ Open the network configuration of your PC

˚ Change the settings of the TCP/IP – Protocol

(Version 4) of the network interface, on which

[email protected]. You may then get all the

necessary information, as well as the docu-

ment „repair request".

Repair shipments must be boxed within the

original packaging. Otherwise we can't gua-

rantee any warranty. If the device was shipped

in an improper packaging a flat fee for a new

original packaging for the return shipment will

be charged to the customer. In addition, the

"repair request" document must be filled out

correctly and be shipped together with the de-

vice, in order to provide an efficient service and

a processing time of 2 weeks.

For technical reasons, only complete systems

can be accepted for reparation.

you connected the KNX SUPERIO using a net-

work cable and enter the following values:

˚ IP address: 192.168.0.100

˚ Subnet mask: 255.255.255.0

˚ Gateway: 192.168.0.110

˚ Save the new settings; depending on the ins-

talled OS a restart can be necessary.

Once the network settings have been chan-

ged, open a browser on your PC (Google Chro-

me preferred) and enter the following URL into