ESI ESCTDEB Panduan Petunjuk Instalasi - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Termostat ESI ESCTDEB. ESI ESCTDEB 16 halaman. Electronic dual cylinder thermostat
Juga untuk ESI ESCTDEB: Petunjuk Pengguna (8 halaman)

Halaman Cetak

Arrange for an annual maintenance and inspection schedule

to be carried out by a competent person on every part of the

heating and hot water system.

Safety Notice

WARNING!

Always isolate the AC mains supply before installing.

this product must be fitted by a qualified person, and

installation must comply with the guidance provided in

the current editions of BS767 (IEE wiring regulations)

and part "P" of the building regulations.

Fitting the Cylinder Thermostat

1. Slacken the three fixing screws, and insert both sensors

fully into the pocket.

2. Position the thermostat onto the pocket.

3. Tighten the three screws to secure the thermostat, take

care not to over tighten.

4. Complete the wiring connections.

N.B. As a safety feature, when first connected the Electronic

Dual Cylinder Thermostat will call for heat until the

hot water cylinder has reached 61°C and held that

temperature for one hour. During this time there will be

a live output to the DHW zone valve and therefore to the

boiler and the pump.

Boiler Setting

To ensure the elimination of Legionella Bacteria in the Hot

Water Cylinder, at least once a week the Cylinder should

be heated to 61°C. This is carried out automatically by the

ESCTDEB. The Boiler Thermostat (output temperature)

must therefore be set to maximum and homeowners