ESI ESRTP4 Panduan Petunjuk Instalasi - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Termostat ESI ESRTP4. ESI ESRTP4 16 halaman. Programmable room thermostat
Juga untuk ESI ESRTP4: Petunjuk Pengguna (20 halaman)

Halaman Cetak

Warning Notices

2.4

WARNING: Always isolate the AC mains supply before

installing. This product must be fitted by a competent

person, and installation must comply with the guidance

provided in the current editions of BS767 (IEE wiring

regulations) and part "P" of the building regulations.

Wiring diagram

2.5

Fitting the Programmable Room Thermostat

2.6

The ideal position to locate the Programmable Room

Thermostat is about 1.5m above floor level, in a location

where the thermostat is accessible, reasonably lit and free

from extremes of temperature and draughts. Do not position

the thermostat near sources of heat, such as radiators, lights,

TV, direct sunlight or on an outside wall

Installation

1. Remove the front cover using a flat screwdriver in the

two holes at the top of the programmer and separate

from back plate.

2. Fix the back plate directly on the wall using suitable

wall plugs and screws.

1.0-2.5mm

6mm MAX

OFF