ESI ESRTP4 Instrukcja instalacji - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Termostat ESI ESRTP4. ESI ESRTP4 16 stron. Programmable room thermostat
Również dla ESI ESRTP4: Instrukcje użytkownika (20 strony)

Drukuj stronę
ESI ESRTP4 Instrukcja instalacji
Warning Notices
2.4
WARNING: Always isolate the AC mains supply before
installing. This product must be fitted by a competent
person, and installation must comply with the guidance
provided in the current editions of BS767 (IEE wiring
regulations) and part "P" of the building regulations.

Wiring diagram

2.5
Fitting the Programmable Room Thermostat
2.6
The ideal position to locate the Programmable Room
Thermostat is about 1.5m above floor level, in a location
where the thermostat is accessible, reasonably lit and free
from extremes of temperature and draughts. Do not position
the thermostat near sources of heat, such as radiators, lights,
TV, direct sunlight or on an outside wall
Installation
1. Remove the front cover using a flat screwdriver in the
two holes at the top of the programmer and separate
from back plate.
2. Fix the back plate directly on the wall using suitable
wall plugs and screws.
8
1.0-2.5mm
2
6mm MAX
NC
1
OFF
2
OFF
NO
3
ON