Akiyama CDX-MP200S Buku Petunjuk - Halaman 5
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pemutar CD Akiyama CDX-MP200S. Akiyama CDX-MP200S 16 halaman. Professional cd player
Halaman Cetak1. DISPLAY BUTTON
LCD-display for displaying the different
mades and functions.
2. SEARCH WHEEL
This wheel has 4 forward and 4 reverse speed
positions allowing you to quickly scan through tracks. The more you
turn the wheel in either direction the faster you search.
These buttons are used the select a track.
3. TRACK BUTTON
Tapping the button will forward/back skip to the next track, holding
down the button will rapidly forward/back skip through the tracks.
4. IN BUTTON
This function allows you to set a cue point without
music interrupt. This button also sets the starting point of a seamless
loop.
OUT BUTTON
This button is used to set the ending point of a loop.
A loop is started by pressing the IN button, pressing the OUT button
set the loop ending point. The loop will continue to play until the OUT
button is pressed once again.
If a seamless loop has been made, but the CD
5. RELOOP BUTTON
player is not actively in seamless loop mode (a loop is not playing),
pressing the RELOOP button will instantly reactivate the seamless
loop mode. To exit loop, press the OUT button. LOOP and RELOOP
will appear in the LCD display when the reloop function is available.
During play mode, pressing the RELOOP button will instantly return
play the last set point without interrupt of music.
Pressing the CUE button during playback
6. CUE BUTTON
immediately pauses playback and returns the track to the last set cue
point. In pause mode and the CD is at the cue point, press the CUE
button to provide cue monitor. The red CUE LED will lit when the CD
is at the cue point.
7. PLAY/PAUSE BUTTON
from play to pause or from pause to play. In skid mode, press this
button to break or slow start.
8. SAMPLER BUTTON
Press this button, then press the desired
BANK button to set the sampler mode. When sampler mode is set,
then the sampler will mix the CD music together. The sampler can
Each press of the button to change
PART NAMES AND FUNCTIONS
play even no disc inside. The sampler will play only once or
continuous depends on pressing sampler button once for continuous
play and LED is lit; press button again to single play and LED is flash.
And press again to cancel sampler function.
9. MEMORY BUTTON
then press the desired BANK button to memorized the music from the
cue point. The music length to be memorized is determined by the
length of BANK. When the memory mode is set, the MEMORY LED
is lit. You can also memorize the BANKs, FX' parameter, and the last
play mode (i.e. time, single/continuous, pitch select, activated FX) by
pressing the memory for 1 sec. To recall the BANKs and FX'
parameter, just make the memory mode set before put the disc into the
CD tray.
10. EJECT BUTTON
not eject unless the player is in cue or pause, this prevent accidentally
ejecting the disc when in play mode.
11. TEMPO LOCK BUTTON
tempo lock mode and the pitch control mode. Tempo lock mode
allows tempo change while maintaining the original key. When the
tempo lock mode is selected, the LED above the TEMOP LOCK
button glows red.
12. PITCH ON/OFF BUTTON
PITCH SLIDER function on and off.
13. 4%,8%,16%,100%PITCH SELECT BUTTON
button in order to change pitch percentage of 4%,8%,16%,100%.
14. BANK BUTTONS
MEMORY LED is lit will set the memory mode. The music from the
cue point will be memorized to the flash. Press the desired BANK
button when the SAMPLER LED is lit will set the sampler mode. The
sampler length is determined by the smaller one of out point and bank
length. Press the desired BANK button will return to the start point
instantly. The LED of the BANK button last pressed will be flashing.
Press this button to set the memory mode,
Press this button to eject disc. The disc will
This button is used to choose the
This button is used to turn the
Press the desired BANK button when the
Press the
3