- ページ 5

CDプレーヤー Akiyama CDX-MP200SのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Akiyama CDX-MP200S 16 ページ。 Professional cd player

ページを印刷する

1. Specifications

1. DISPLAY BUTTON

LCD-display for displaying the different

mades and functions.

2. SEARCH WHEEL

This wheel has 4 forward and 4 reverse speed

positions allowing you to quickly scan through tracks. The more you

turn the wheel in either direction the faster you search.

These buttons are used the select a track.

3. TRACK BUTTON

Tapping the button will forward/back skip to the next track, holding

down the button will rapidly forward/back skip through the tracks.

4. IN BUTTON

This function allows you to set a cue point without

music interrupt. This button also sets the starting point of a seamless

loop.

OUT BUTTON

This button is used to set the ending point of a loop.

A loop is started by pressing the IN button, pressing the OUT button

set the loop ending point. The loop will continue to play until the OUT

button is pressed once again.

If a seamless loop has been made, but the CD

5. RELOOP BUTTON

player is not actively in seamless loop mode (a loop is not playing),

pressing the RELOOP button will instantly reactivate the seamless

loop mode. To exit loop, press the OUT button. LOOP and RELOOP

will appear in the LCD display when the reloop function is available.

During play mode, pressing the RELOOP button will instantly return

play the last set point without interrupt of music.

Pressing the CUE button during playback

6. CUE BUTTON

immediately pauses playback and returns the track to the last set cue

point. In pause mode and the CD is at the cue point, press the CUE

button to provide cue monitor. The red CUE LED will lit when the CD

is at the cue point.

7. PLAY/PAUSE BUTTON

from play to pause or from pause to play. In skid mode, press this

button to break or slow start.

8. SAMPLER BUTTON

Press this button, then press the desired

BANK button to set the sampler mode. When sampler mode is set,

then the sampler will mix the CD music together. The sampler can

Each press of the button to change

PART NAMES AND FUNCTIONS

play even no disc inside. The sampler will play only once or

continuous depends on pressing sampler button once for continuous

play and LED is lit; press button again to single play and LED is flash.

And press again to cancel sampler function.

9. MEMORY BUTTON

then press the desired BANK button to memorized the music from the

cue point. The music length to be memorized is determined by the

length of BANK. When the memory mode is set, the MEMORY LED

is lit. You can also memorize the BANKs, FX' parameter, and the last

play mode (i.e. time, single/continuous, pitch select, activated FX) by

pressing the memory for 1 sec. To recall the BANKs and FX'

parameter, just make the memory mode set before put the disc into the

CD tray.

10. EJECT BUTTON

not eject unless the player is in cue or pause, this prevent accidentally

ejecting the disc when in play mode.

11. TEMPO LOCK BUTTON

tempo lock mode and the pitch control mode. Tempo lock mode

allows tempo change while maintaining the original key. When the

tempo lock mode is selected, the LED above the TEMOP LOCK

button glows red.

12. PITCH ON/OFF BUTTON

PITCH SLIDER function on and off.

13. 4%,8%,16%,100%PITCH SELECT BUTTON

button in order to change pitch percentage of 4%,8%,16%,100%.

14. BANK BUTTONS

MEMORY LED is lit will set the memory mode. The music from the

cue point will be memorized to the flash. Press the desired BANK

button when the SAMPLER LED is lit will set the sampler mode. The

sampler length is determined by the smaller one of out point and bank

length. Press the desired BANK button will return to the start point

instantly. The LED of the BANK button last pressed will be flashing.

Press this button to set the memory mode,

Press this button to eject disc. The disc will

This button is used to choose the

This button is used to turn the

Press the desired BANK button when the

Press the