- ページ 6
CDプレーヤー Akiyama CDX-MP200SのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Akiyama CDX-MP200S 16 ページ。 Professional cd player
ページを印刷するPART NAMES AND FUNCTIONS
15. PITCH SLIDER
This slider is used to adjust the playback pitch
percentage. The slider is a set adjustment and will remain set until the
pitch slider is move or the pitch function has been turned off.
The TIME button will switch the time value
16. TIME BUTTON
described in the time meter between elapsed play time, track
remaining time, and total remaining time.
SCRATCH MODE
:
To switch scratch on/off when each press the TIME button down for 1
sec. LCD will show "EFFECT" when scratch is on.
17. SGL/CTN BUTTON
between single track play or continuous track play (all tracks in order).
18. PITCH -/+ BUTTONS
increase when button is pressing and returns to the original pitch when
the button is released.
REAR PANEL
23. AUDIO OUT-SOCKETS
analogue. Connect the output to the respective input of your mixer.
24. DIGITAL OUT-SOCKET
digital. Connect the output to the respective input of a digital
amplifier for example.
25. RELAY SOCKET
Via the RELAY SOCKET, two CD players
This will indicate if the Auto Cue is on or off. Press
1. AUTO CUE:
and hold the SGL/CTN for 1 sec. to turn the Auto Cue function on and
off.
2. SINGLE:
Shows when the unit is set to play just one track at a
time. When this is not lit the CD will play continuously through all
tracks. The function is controlled by the SGL/CTN button.
3. LOOP :
shows when the CD is repeating a particular area with the
music on the CD.
shows when the CD has had a loop set previously and
4. RELOOP:
can go back to loop again.
4
This function allows you to choose
The desired pitch of CD decrease or
The music-signal of these sockets if
The music-signal of this socket is
19. JOG WHEEL
The wheel is used for pitch bend while playing, or
frame search during pause
This LED is illuminated when a CD tray is empty.
20. CD LED
Turning this knob enter "folder mode" to
21. FOLDER KNOB
choose the desired folder then turn the track knob to choose the
desired track within the folder; the folder and track name that is
playing showed in the LCD. ( Pushing the folder knob enter "folder
mode" to see the folder name when the normal mode.)
22. TRACK KNOB
Pushing the track knob into "normal mode" and
turn this button to choose the desired track on the disc and show the
track name is playing in the LCD
can relay play.
If you connect with a mixer which supporting fader start, you can also
relay play via mixer's cross-fader
26. POWER SWITCH
Press this button to start operation.
27.AC CONNECTION
Plug the power supply cable in here.
5. ELAPSED, TOTAL REMAIN:
shown on the display is the ELAPSED, TOTAL REMAINING or
single song remaining time.
6. ~ 8.MINUTE, SECOND, FRAME:
information on the current track and time
9. TIME BAR:
shows either time remaining or elapsed depending
on the setting of the TIME button.
10. PITCH:
indicator light to show percent of pitch is displayed.
Shows the pitch percentage of the song.
11. PITCH:
12. ANTI SHOCK AND BUFFER INDICATOR:
status is represented on the display by a bucket being filled or
emptied. The bucket itself represents the instant start function works
by buffer memory. If the bucket is flashing, the instant start is not
available. Each bar within the bucket represents 2 seconds of anti
shock protection. There is up to 10 seconds of anti shock available.
13. CUE :
Lit when the unit is at a cue point.
14. PAUSE:
The PAUSE indicators light during pause or cue mode.
15. PLAY:
lit while the unit is playing a CD.
This will indicate that a CD is loaded in the
16. CD INDICATOR:
drive.
This will indicate that a Mp3 disc is loaded
17. MP3 INDICATOR :
in the drive.
18. CHARACTER DISPLAY:
track and album when a MP3 disc is loaded.
19. TEMPO LOCK:
This will indicate the Tempo Lock function is
active.
20. TRACK:
Shows the track that unit is playing with.
Shows SCRATCH EFFECT is ON.
21. EFFECT:
.
These indicate that the time
These displays indicate
The memory
This will display the name of the