CLEARPATH DINGO Panduan Pengguna - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Robotika CLEARPATH DINGO. CLEARPATH DINGO 20 halaman. Indoor platform
Halaman Cetak2.1 Wireless Access
To get Dingo connected to your local wifi, you must first access the internal computer using a wired connection. Open
the chassis, lower the computer tray, and connect to the network port labeled
2.1.1 Static IP Configuration
Set your laptop's ethernet port to a static IP such as
1. Click on the Wifi icon in the upper-right corner of your screen, and select Edit Connections
2. In the Network Connections window, under Ethernet , select your wired connection and then click Edit
3. Select the IPv4 Settings tab and then change the Method to
4. Click the Add button to add a new address
5. Enter a
192.168.131.101
column, and then select Save
Rev. 1.1.0
192.168.131.101
as the static IP under the Address column, and enter
Figure 7: Static IP Configuration
STATIC
. To do this in Ubuntu, follow the steps below:
Manual
9
with a standard ethernet cable.
under the NetMask
255.255.255.0
Dingo