CLEARPATH DINGO Gebruikershandleiding - Pagina 9
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} CLEARPATH DINGO. CLEARPATH DINGO 20 pagina's. Indoor platform
Pagina afdrukken2.1 Wireless Access
To get Dingo connected to your local wifi, you must first access the internal computer using a wired connection. Open
the chassis, lower the computer tray, and connect to the network port labeled
2.1.1 Static IP Configuration
Set your laptop's ethernet port to a static IP such as
1. Click on the Wifi icon in the upper-right corner of your screen, and select Edit Connections
2. In the Network Connections window, under Ethernet , select your wired connection and then click Edit
3. Select the IPv4 Settings tab and then change the Method to
4. Click the Add button to add a new address
5. Enter a
192.168.131.101
column, and then select Save
Rev. 1.1.0
192.168.131.101
as the static IP under the Address column, and enter
Figure 7: Static IP Configuration
STATIC
. To do this in Ubuntu, follow the steps below:
Manual
9
with a standard ethernet cable.
under the NetMask
255.255.255.0
Dingo