CLEARPATH DINGO Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} CLEARPATH DINGO. CLEARPATH DINGO 20 pagina's. Indoor platform

2 GETTING STARTED

The first step is to power up your Dingo and have some fun driving it around! If you've just unpacked Dingo from its
packaging, you may need to open it up and connect the battery.
Press the power button
30 seconds for the internal PC to finish booting up.
When the comms LED (
in communication. At this point, press the PS button on the Sony Bluetooth controller to sync the controller to Dingo.
Once the blue LED on the top of the controller goes solid, you're paired and ready to drive. Hold the L1 trigger button
(deadman switch), and push the left thumbstick forward to drive the Dingo. For full speed mode, hold the R1 trigger.
See Figure 6 for the Sony PS4 controls layout.
If you're not seeing any action, check Contact on page 20 to get in touch with support.
Rev. 1.1.0
on Dingo's HMI panel. The LEDs should show a test pattern, after which you will wait about
) is green, this signals that the PC is finished booting up, and that the PC and MCU are
Deadman Switch [L1]
Steer
Forward/Backward
Dingo-D: Yaw Left/Right
Dingo-O: Planar Left/Right
Figure 6: PS4 Controls Layout
Turbo [R1]
Full Speed Mode
Steer
Dingo-O: Yaw Left/Right
8
Dingo