Altocraft 240-2087 Panduan Operator - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Operator untuk Melihat Altocraft 240-2087. Altocraft 240-2087 10 halaman. 8-1/4 inch compound miter saw

SAFETY PRECAUTIONS FOR COMPOUND MITER SAW

8. ALWAYS USE TABLE EXTENSIONS AND CLAMPS to support the material

when sawing long work pieces.

9. THE MATERIAL SHOULD BE PLACED FIRMLY AGAINST THE FENCE AND

TABLE. The turning of the saw blade should force it down against the table

and rearward against the fence during the cut. Movement of the workpiece

during the cut may cause the blade jam and create a kickback. When this

happens, the cutting head may jump out of your hand or the workpiece may

fly loose and cause serious injury.

10. DO NOT START THE SAW WITH THE BLADE IN CONTACT WITH ANY

SURFACE. This may cause the saw to bounce or kick back violently and could

cause injury.

11. IF MAKING A CUT USING ONE HAND TO HOLD THE SAW, ensure the free

hand is clear of the cutting area.

SPECIFICATIONS

= Voltage: 120 volts AC, 60Hz.

= Current rating: 10 amps

= No-load speed: 4800 rpm

= 8-1/4" (210mm) 24 tooth carbide tipped saw blade

= 5/8" (16mm) arbor

= Bevel cuts up to 45° left

= Miter cuts up to 45° left & right

with detents at 0°, 15°, 22.5°, 30°, & 45° left and right

Included:

1 dust bag

1 blade wrench

2 table side extensions

1 hold-down clamp

Switch

Brush cover

Movable guard

Saw blade

Dust bag

Bevel lock lever

Hold-down clamp assembly

Tab b le extension

Tab b le extension lock screw

10.

Handle

11.

Miter scale