Altocraft 240-2087 Gebruikershandleiding - Pagina 4
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Altocraft 240-2087. Altocraft 240-2087 10 pagina's. 8-1/4 inch compound miter saw
Pagina afdrukken
SAFETY PRECAUTIONS FOR COMPOUND MITER SAW
8. ALWAYS USE TABLE EXTENSIONS AND CLAMPS to support the material
when sawing long work pieces.
9. THE MATERIAL SHOULD BE PLACED FIRMLY AGAINST THE FENCE AND
TABLE. The turning of the saw blade should force it down against the table
and rearward against the fence during the cut. Movement of the workpiece
during the cut may cause the blade jam and create a kickback. When this
happens, the cutting head may jump out of your hand or the workpiece may
fly loose and cause serious injury.
10. DO NOT START THE SAW WITH THE BLADE IN CONTACT WITH ANY
SURFACE. This may cause the saw to bounce or kick back violently and could
cause injury.
11. IF MAKING A CUT USING ONE HAND TO HOLD THE SAW, ensure the free
hand is clear of the cutting area.
SPECIFICATIONS
= Voltage: 120 volts AC, 60Hz.
= Current rating: 10 amps
= No-load speed: 4800 rpm
= 8-1/4" (210mm) 24 tooth carbide tipped saw blade
= 5/8" (16mm) arbor
= Bevel cuts up to 45° left
= Miter cuts up to 45° left & right
with detents at 0°, 15°, 22.5°, 30°, & 45° left and right
Included:
1 dust bag
1 blade wrench
2 table side extensions
1 hold-down clamp
FUNCTIONAL DESCRIPTION
1.
Switch
2.
Brush cover
Movable guard
.
4.
Saw blade
5.
Dust bag
6.
Bevel lock lever
7.
Hold-down clamp assembly
8.
Tab b le extension
9.
Tab b le extension lock screw
10.
Handle
11.
Miter scale
4
5
7
6
9
8
11
10
1
2
3
4