ClearSpan 104450 Buku Petunjuk - Halaman 9

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Tenda ClearSpan 104450. ClearSpan 104450 15 halaman. Poly shelters sunblocker pavilion

Step 7: Install a 2 socket cross coupling at the middle of the chord.

Step 8: Connect the chord to the legs via the 3-way "Ts" previously installed.

Step 9: Repeat the steps above to assemble the other end rafter exactly like the one you just made.

Step 10: Assemble your inside rafters. These are similar, but do not have the horizontal chord or

diagonal corner braces. Inside rafters have crossover fittings at the peak and just below the

bends in the leg sections.

Step 11: Add swivel sockets to the legs of both end rafters and 2 of the inside rafters. These will

later be used to connect diagonal struts. Look at the frame drawing to approximate the

locations of these couplings. On the legs of the end rafters, the should be a foot or so below

the bend. On the two inside rafters they should go a foot or so up from the bottom ends.

Typical Inside Rafter

Page 9