3G Audio AK80 Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penguat 3G Audio AK80. 3G Audio AK80 12 halaman. Stereo amplifier

Halaman Cetak

1. Technical Specifications

ADDITIONAL DESCRIPTION

TECHNICAL SPECIFICATIONS

Distortion Limit Output Power:

Frequency Response:

Load Impedance:

Harmonic Distortion:

Intermodulation Distortion

Slew Rate:

Damping Factor:

Signal to Noise Ratio:

Minimum Electromotive Force:

Overload Electromotive Force:

HF Compensation:

LF Compensation:

Dimensions(WxDxH):

Net Weight:

ACCESSORIES

Please check whether the accessories are complete after you open the

package according to the list below:

Feet

User's manual

Warranty card

Certificate

MAINTENANCE

The equipment can be cleaned with dry cotton cloth. If the equipment is

abnormally dirty, please clean it with a piece of cotton cloth dipped in detergent

for 5 to 6 seconds, and finally dry it with a piece of dry cloth.

Don't use alcohol, insecticide, or any other volatile or corrosive liquid to clean

the equipment, which will cause colour fade or flake-off of the equipment surface.

When the equipment is not used for a long time, please keep it in an appropriate

dry place.

2x80W (THD+N: 0.5%, with 8

2x120W (THD+N: 0.5%, with 4

240W (THD+N: 0.5%, with 8

20Hz~20KHz(+/-3dB)with low-cut switch at GENERAL location

100Hz~20KHz(+/-3dB)with low-cut switch at LOWCUT location

(in mono/stereo mode), 4

(in bridge mode)

0.03

0.05

12V/ S

200

100db

6dB(10KHz)

6dB(100Hz)

430x160x43.8mm(without feet)

5.6Kg

load, in stereo/mono mode)

load, in bridge mode)

(in mono/stereo mode),

4pcs

1pc