3G Audio AK80 User Manual - Page 11
Browse online or download pdf User Manual for Amplifier 3G Audio AK80. 3G Audio AK80 12 pages. Stereo amplifier
Print PageADDITIONAL DESCRIPTION
TECHNICAL SPECIFICATIONS
Distortion Limit Output Power:
Frequency Response:
Load Impedance:
Harmonic Distortion:
Intermodulation Distortion
Slew Rate:
Damping Factor:
Signal to Noise Ratio:
Minimum Electromotive Force:
Overload Electromotive Force:
HF Compensation:
LF Compensation:
Dimensions(WxDxH):
Net Weight:
ACCESSORIES
Please check whether the accessories are complete after you open the
package according to the list below:
Feet
User's manual
Warranty card
Certificate
MAINTENANCE
The equipment can be cleaned with dry cotton cloth. If the equipment is
abnormally dirty, please clean it with a piece of cotton cloth dipped in detergent
for 5 to 6 seconds, and finally dry it with a piece of dry cloth.
Don't use alcohol, insecticide, or any other volatile or corrosive liquid to clean
the equipment, which will cause colour fade or flake-off of the equipment surface.
When the equipment is not used for a long time, please keep it in an appropriate
dry place.
2x80W (THD+N: 0.5%, with 8
2x120W (THD+N: 0.5%, with 4
240W (THD+N: 0.5%, with 8
20Hz~20KHz(+/-3dB)with low-cut switch at GENERAL location
100Hz~20KHz(+/-3dB)with low-cut switch at LOWCUT location
8
(in mono/stereo mode), 4
8
(in bridge mode)
0.03
:
0.05
12V/ S
200
100db
1V
8V
6dB(10KHz)
6dB(100Hz)
430x160x43.8mm(without feet)
5.6Kg
load, in stereo/mono mode)
load, in stereo/mono mode)
load, in bridge mode)
(in mono/stereo mode),
4pcs
1pc
1pc
1pc