Edgewater Networks EdgeProtect 7300 Manual Perangkat Keras - Halaman 5

Jelajahi secara online atau unduh pdf Manual Perangkat Keras untuk Perangkat Keras Jaringan Edgewater Networks EdgeProtect 7300. Edgewater Networks EdgeProtect 7300 16 halaman. Enterprise session border controller 7000 series
Juga untuk Edgewater Networks EdgeProtect 7300: Panduan Pemasangan Perangkat Keras (18 halaman)

Halaman Cetak
7300 Hardware Guide
Input Power Socket
J
On/Off Switch
K
7300 EdgeProtect Series Ethernet LED's
Color
Label
Green or
other
ACK/LINK
Green or
other
Yellow
Speed
Green
Accepts 3-pin shroud female plug for input power
System power on/off
Indication
1: Ethernet port is receiving power
On
2: Good link between the Ethernet port and the connected switch
1: The adapter and switch are not receiving power
Off
2: No connection between both ends of the network cable, check cable,
replace cable.
The adapter is sending and receiving network data. The frequency of the
Flashing
flashing varies with the amount of data being transferred.
ACK/LINK LED must be on. This LED will show the system operating at
On
1000 Mbps
ACK/LINK LED must be on. This LED will show the system operating at
On
100 Mbps
ACK/LINK LED must be on. This LED will show the system operating at 10
Off
Mbps
Status
4