Edgewater Networks EdgeProtect 7300 하드웨어 매뉴얼 - 페이지 5
{카테고리_이름} Edgewater Networks EdgeProtect 7300에 대한 하드웨어 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Edgewater Networks EdgeProtect 7300 16 페이지. Enterprise session border controller 7000 series
Edgewater Networks EdgeProtect 7300에 대해서도 마찬가지입니다: 하드웨어 설치 매뉴얼 (18 페이지)
페이지 인쇄7300 Hardware Guide
Input Power Socket
J
On/Off Switch
K
7300 EdgeProtect Series Ethernet LED's
Color
Label
Green or
other
ACK/LINK
Green or
other
Yellow
Speed
Green
Accepts 3-pin shroud female plug for input power
System power on/off
Indication
1: Ethernet port is receiving power
On
2: Good link between the Ethernet port and the connected switch
1: The adapter and switch are not receiving power
Off
2: No connection between both ends of the network cable, check cable,
replace cable.
The adapter is sending and receiving network data. The frequency of the
Flashing
flashing varies with the amount of data being transferred.
ACK/LINK LED must be on. This LED will show the system operating at
On
1000 Mbps
ACK/LINK LED must be on. This LED will show the system operating at
On
100 Mbps
ACK/LINK LED must be on. This LED will show the system operating at 10
Off
Mbps
Status
4