ClearWater AQUA ELITE 50 Panduan Pemasangan & Perawatan - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pemasangan & Perawatan untuk Peralatan Pencahayaan ClearWater AQUA ELITE 50. ClearWater AQUA ELITE 50 20 halaman.

Halaman Cetak

Generously wrap Teflon tape around the threaded part of the electrode assembly

several times. Screw electrode into the tee. Do not over tighten.

G). INSTALLING THE VENTURI INJECTOR

Power Source/

Pump Timer

Pump

Filter

N = Nylon Hose Clamps

Mount the venturi manifold on the return line (after the filter, pump, electrode chamber, heater, etc.) so it is the

last item before entering the pool. This is very important.

MAKE SURE THE WATER FLOWS IN THE DIRECTION OF THE ARROWS MARKED ON THE

VENTURI MANIFOLD.

The venturi manifold comes in two-inch pipe. If plumbing size is 1 ½", you will need to add 2" x 1 ½" reduced

bushings on each end of the manifold (included with the venturi manifold package.)

F). INSTALLING THE ELECTRODE

Electrode

2" manifold with

venturi injector and

ball valve assembly

Heater

1½" reducer bushings (if needed)

N = Nylon Hose Clamps

Kynar check valve

¼" reinforced vinyl hose

Venturi Injector

Clear view window

water flow

POOL