Artforma S1 Panduan Pengguna - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Stasiun Cuaca Artforma S1. Artforma S1 6 halaman.
Juga untuk Artforma S1: Panduan Pengguna (19 halaman)
Halaman Cetak2. [COLOUR] backlight colour control knob
✓ Rotate the knob clockwise or anticlockwise to tune the backlight with 256 colour.
✓ Press [COLOUR] knob to turn on or turn off the backlight colour change.
3. LCD display
4. [TIME] key
✓ In normal time mode, press and hold 2 seconds to enter time setting mode.
✓ In time setting mode, press to step next setting mode.
5. [ALARM] key
✓ For alarm setting and operation
6. [CHANNEL / +] key
✓ In normal mode, press to switch between Channel 1-3 of outdoor sensores
✓ In normal mode, press and hold 2 seconds to enter auto-cycle mode of Channel 1-3 readings.
✓ During auto-cycle mode, press once to return to normal mode.
✓ In setting mode, press to increase the setting values (Hold it without releasing to speed up
the setting).
7. [MAX / MIN] key
✓ In normal mode, press to check the minimum and maximum records of temperature and
humidity.
✓ In setting mode, press to decrease the setting values (Hold it without releasing to speed up
the setting).
8. [OUTDOOR TEMP] key
✓ Press to enter Colour by temperaturę mode and change colour according to the outdoor
temperature. Value that received from the wireless sensors. It has 17 backlight colours to
display different temperature ranges).
9. [RAINBOW] key
✓ When the backlight is on, press to change backlight colour in this sequence: white, red,
orange, yellow, green, cyan, blue, purple.
10. Power jack
✓ DC 4.6V 300mA
11. [RCC] key
✓ Press to receive the RC signal manually.
12. [SENSOR] key
✓ Press to receive the data from the transmitter.