Artforma S1 Panduan Pengguna - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Stasiun Cuaca Artforma S1. Artforma S1 6 halaman.
Juga untuk Artforma S1: Panduan Pengguna (19 halaman)
Halaman Cetak13. [C / F] slide switch
✓ Slide to switch between Celsius and Fahrenheit.
14. [OFF / LO / HI] slide switch
✓ Slide to [OFF] position to turn off the backlight.
✓ Slide to [LO] position for the dimmer backlight.
✓ Slide to [HI] position for the brighter backlight.
15. [RESET] key
✓ Press to reset all values to default values.
✓ In case of malfunction, press it to reset all values.
16. Battery door
✓ Accommodates a buton cel CR2032 for backup time and setting.
WIRELESS HYGRO-THERMO OUTDOOR SENSOR
1. LED indicator
✓ Flashes when the remote unit is transmitting.
2. LCD display to show the detected temperature or humidity of the sensor.
3. Wall mounting holder
4. [RESET] key
✓ Pres to restart the sensor.
5. [CHANNEL] slide switch
✓ Assign the transmitter to Channel from 1 to 3.
6. Battery compartment
✓ Accommodates 2 x AA size batteries.
BEFORE USING THE OUTDOOR SENSOR
1. Remove the battery door.
2. Insert 2 x AA size batteries into the battery compartment. Make sure you insert them the
right way according to the polarity information marked on the battery compartment.
3. Replace the battery door.
NOTE:
✓ Once the channel is assigned to a sensor, you can only change it by removing the batteries or
resetting the sensor, you also need to press the [SENSOR] key on main unit to pair this
sensor.
✓ Avoid placing the transmitter in direct sunlight, rain or snow.