ClearWater Lights BMW K1600GT Panduan Instalasi - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Aksesori Sepeda Motor ClearWater Lights BMW K1600GT. ClearWater Lights BMW K1600GT 12 halaman. Billie brake light
Juga untuk ClearWater Lights BMW K1600GT: Panduan Awal (8 halaman)
Step 3: Mounting The Lights
Fender Mount Overview:
(detailed diagrams on next page)
• One side at a time, remove both fender bolts. Be sure to keep fender
from hanging in a fashion that damages it. Use a wire tie or piece of wire
to hold the fender until you are ready to install the new bolts. Inspect the
female threads on the brackets for dirt or foreign substance. If possible,
use compressed air (wear protective glasses) or small bottle brush to
clean the threads.
• Pre-assemble the lights, mounting bracket, shoulder washers (if
needed) and spacers with new bolts. Add 1 or 2 plastic washers to
shoulder washer to make up difference in thickness of front fender if
needed.
• Gently screw all bolts in hand tight. Inspect the bolt length and spacer
alignment before tightening the bolts. Assembly will resemble one of the
diagrams below depending on model.
• The mounting bracket can be mounted facing down (shown) or up to
give the desired adjustability range.
Page 7