ClearWater Lights BMW K1600GT Посібник з монтажу - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник з монтажу для Аксесуари для мотоциклів ClearWater Lights BMW K1600GT. ClearWater Lights BMW K1600GT 12 сторінок. Billie brake light
Також для ClearWater Lights BMW K1600GT: Попередній посібник (8 сторінок)
Друкувати сторінку
Step 3: Mounting The Lights
Fender Mount Overview:
(detailed diagrams on next page)
• One side at a time, remove both fender bolts. Be sure to keep fender
from hanging in a fashion that damages it. Use a wire tie or piece of wire
to hold the fender until you are ready to install the new bolts. Inspect the
female threads on the brackets for dirt or foreign substance. If possible,
use compressed air (wear protective glasses) or small bottle brush to
clean the threads.
• Pre-assemble the lights, mounting bracket, shoulder washers (if
needed) and spacers with new bolts. Add 1 or 2 plastic washers to
shoulder washer to make up difference in thickness of front fender if
needed.
• Gently screw all bolts in hand tight. Inspect the bolt length and spacer
alignment before tightening the bolts. Assembly will resemble one of the
diagrams below depending on model.
• The mounting bracket can be mounted facing down (shown) or up to
give the desired adjustability range.
Page 7