dji AGRAS MG-1 Panduan Memulai Cepat - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Drone dji AGRAS MG-1. dji AGRAS MG-1 19 halaman.
Juga untuk dji AGRAS MG-1: Panduan Pengguna (3 halaman)

Halaman Cetak

AGRAS MG-1

Quick Start Guide

Try to keep the aircraft inside the optimal transmission range. If the signal is weak, adjust the antennas or fly the

aircraft closer.

Avoid using wireless devices that use the same frequency bands as the remote controller.

Getting Ready for Takeoff

1. Place the aircraft on an open, flat ground with the Aircraft Status Indicator facing towards you.

2. Unfold propellers and check that they are unfolded and mounted onto the motors securely. Unfold frame arms

and tighten arm sleeves firmly. (Refer to Page 6 for how to unfold the frame arms.)

3. Toggle the Flight Mode Switch to P-mode.

4. Toggle the Operation Mode Switch to Manual mode.

5. Power on the remote controller.

6. Connect the battery to the communication port and then the XT90 port.

Calibrating the Compass

1. Flip the Flight Mode Switch back-and-forth at least 6 times, until the Aircraft Status Indicator becomes

solid blue.

2. Hold the aircraft upright and rotate it 360 degrees along the central axis, until the Aircraft Status Indicator

changes from solid blue to solid green.

3. Hold the aircraft with its nose facing up and rotate 360 degrees along the central axis.

P-mode

M-mode

4. The Aircraft Status Indicator shows the current flight mode when calibration is complete. If the Aircraft Status

Indicator becomes blinking red, repeat the steps above to recalibrate the compass.

Optimal Transmission Range