dji AGRAS MG-1 Panduan Memulai Cepat - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Drone dji AGRAS MG-1. dji AGRAS MG-1 19 halaman.
Juga untuk dji AGRAS MG-1: Panduan Pengguna (3 halaman)

Halaman Cetak

Installation

Threadlocker is required for installation. Apply threadlocker when mounting landing gear, spray tank, sprinklers and

radar module. Ensure threadlocker is totally dry and solid before flight.

Ensure that all installation and connection procedures are completed before powering on the aircraft.

Mounting the Landing Gear

1. Identify the landing gear leg containing the compass cable.

2. Take out the cable protector from the landing gear leg and open it. Looking from the rear, connect the

compass cable to the compass port on the right side of the aircraft body. Put the assembled cable into the

cable protector slot and close it. Be careful not to damage the cable.

3. Place the cable protector and cable into the mounting position on the center frame then mount the right

landing gear leg to the mounting position and tighten the M3×10 screws.

Aircraft's Rear

Cable Protector

Compass Port

Compass Cable

4. Mount the left landing gear leg and tighten the M3 × 10 screws.

Mounting the Spray Tank

1. Insert the four spray tank plugs into the sides of the spray tank.

2. Place the spray tank between the landing gear legs with the delivery pump at the rear of the aircraft. Align the

mounting holes and tighten the four M5 × 18 screws.

AGRAS MG-1

Quick Start Guide

Aircraft's Front