dji AGRAS MG-1 Panduan Memulai Cepat - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Drone dji AGRAS MG-1. dji AGRAS MG-1 19 halaman.
Juga untuk dji AGRAS MG-1: Panduan Pengguna (3 halaman)
Halaman Cetak
3. Fix the hoses to the landing gear and frame arms.
Prepare hose clamps B, M3 × 6 screws and M3 × 8 screws (self-tapping) to fix the hoses to the arms and landing gear.
Clip hose clamps B around the hose at positions that need to be fixed. The hoses should be fixed to the
1
landing gear and at each frame arm junction that leads to a sprinkler.
Attach the hose clamp to the bracket on the landing gear leg and tighten the M3 × 6 screw.
2
Attach the hose clamp to the bottom of the frame arm junction and tighten the M3 × 8 screw (self-tapping).
3
Mounting the Radar Module
1. With the Radar Status Indicator facing outwards, align the mounting holes and tighten the M3 × 8 screws.
2. Connect the radar cable to the radar port on the aircraft body. Be sure to insert the plug in the correct
orientation and tighten its ring to secure.
Radar Status Indicator
AGRAS MG-1
Quick Start Guide
Radar Port
Radar Cable
©
2016 DJI All Rights Reserved.
7