dji OSMO Panduan Memulai Cepat - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Aksesori Kamera dji OSMO. dji OSMO 4 halaman. Gimbal extension
Juga untuk dji OSMO: Panduan Memulai Cepat (11 halaman), Buku Petunjuk (6 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (5 halaman), Panduan Pengguna (8 halaman)

3. Attach the Osmo handle to the Vehicle Mount and then tighten the screw

to secure. The position of the Osmo handle can be adjusted by loosening

the knob on the universal joint.

Ensure the base lock is in the unlocked position before unscrewing

the universal joint.

WARNING

1. Ensure the Vehicle Mount is mounted on a flat and clean surface. Failure

to do so may cause the suction cups to perform poorly and result in the

Vehicle Mount falling off.

2. Ensure the Vehicle Mount is mounted securely and will not fall off.

3. Be observant and check for signs of looseness during your ride.

4. The suction cups may perform poorly in low temperature environments.

DO NOT use the Vehicle Mount if it shows signs of looseness.

5. Bring the Osmo inside of the vehicle if you are travelling at speeds over

100 km/h. Otherwise, the gimbal may enter Protection mode and become

inactive.

The content is subject to change.

Download the latest version from

www.dji.com/product/osmo

If you have any questions about this document, please contact

DJI by sending a message to [email protected].