dji OSMO 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} dji OSMO에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. dji OSMO 4 페이지. Gimbal extension
dji OSMO에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (11 페이지), 사용 설명서 (6 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (5 페이지), 사용자 설명서 (8 페이지)

3. Attach the Osmo handle to the Vehicle Mount and then tighten the screw

to secure. The position of the Osmo handle can be adjusted by loosening

the knob on the universal joint.

Ensure the base lock is in the unlocked position before unscrewing

the universal joint.

WARNING

1. Ensure the Vehicle Mount is mounted on a flat and clean surface. Failure

to do so may cause the suction cups to perform poorly and result in the

Vehicle Mount falling off.

2. Ensure the Vehicle Mount is mounted securely and will not fall off.

3. Be observant and check for signs of looseness during your ride.

4. The suction cups may perform poorly in low temperature environments.

DO NOT use the Vehicle Mount if it shows signs of looseness.

5. Bring the Osmo inside of the vehicle if you are travelling at speeds over

100 km/h. Otherwise, the gimbal may enter Protection mode and become

inactive.

The content is subject to change.

Download the latest version from

www.dji.com/product/osmo

If you have any questions about this document, please contact

DJI by sending a message to [email protected].