djm direct 01985-V2 Manual Petunjuk Asli - Halaman 6
Jelajahi secara online atau unduh pdf Manual Petunjuk Asli untuk Melihat djm direct 01985-V2. djm direct 01985-V2 17 halaman.
Halaman Cetakyour workpieces. Cramped, dark working areas, and uneven,
slippery floors may lead to accidents.
d) Regularly clean and remove sawdust from beneath the saw table
and/or from the dust extraction system.Accumulated sawdust is
flammable and can self-ignite.
e) Secure the table saw. A table saw that is not properly secured may
move or topple over.
f) Remove tools and scraps of wood from the table before switching
the saw on. Distractions and potential jams could be dangerous.
g) Always use saw blades with correct size and shape(diamond
versus round) of arbor holes.
Saw blades that do not match the mounting hardware of the saw will
run off-centre, causing loss of control.
h) Never use damaged or incorrect saw blade mounting materials,
such as flanges, washers, screws or nuts.
These saw blade mounting materials have been specially designed for
your saw, for optimum performance and operational safety.
i) Never stand on the table saw and don not use it as a step stool.
Serious injuries can arise if the tool topples or if you accidentally
come into contact with the saw blade.
j) Make sure that the saw blade is installed to rotate in the correct
direction. Do not use grinding discs, wire brushes or abrasive
wheels on the table saw. Incorrect fitting of the saw blade or the use
of accessories that have not been recommended can result in serious
injuries.
7. Safety instructions for handing saw blades
a) Only use tools which you know how to handle.
b) Pay attention to the maximum speed. The maximum speed stated
on the tool being used must not be exceeded. Keep within the speed
range if one is specified.
c) Note the direction of rotation of the motor and saw blade.
d) Do not use a cracked saw blade. Never attempt to repair a cracked
saw blade. Damaged blades must be replaced.
e) Do not use any loose reducing rings or bushes to reduce the size of
arbor holes on circular saw blades.
f) Handle saw blades with care. It is best to store them in their
original packaging or special containers. Always wear protective
gloves to improve your grip and further reduce the risk of injury.
g) Make sure that all safety devices are fitted correctly before
installing the saw blade.
h) Make sure that the saw blade fulfills the technical specifications
and is correctly fitted.
i) The saw blade supplied should only be used for sawing wood,
never for sawing metal.
j) Always select the correct saw blade for the material to be cut.
k) Make sure that the diameter of the saw blade corresponds to the
specifications of the saw.
l) Use only saw blades that are marked with an equal or higher
rotation speed than that marked on the saw.
m) Use only saw blades recommended by the manufacturer which
conform to EN 847-1, if intended for cutting wood or similar
materials.
n) Wear suitable personal protective equipment, such as:
- hearing protection
- Protective gloves when handling saw blades.
o) WARNING:when changing the saw blade, make sure that the kerf
of the blade is not less than the thickness of the riving knife and that
the thickness of the blades is not greater than the thickness of the
riving knife.
p) When sawing wood and plastics, avoid overheating the saw teeth,
Reduce the feed speed to avoid the plastic melting.
8. Residual Risks
This table saw has been constructed in accordance with the latest
technology and generally recognised safety regulations. Nevertheless,
hazardous situations cannot be ruled out during operation.
- There is a risk of electirc shock if unsuitable electrical equipment is
used to connect the saw to the power supply.
- In addition, concealed residual risks may be present in spite of all
the precautions that have been taken.
- Residual risks can be minimised by observing the safety warnings
and by using the table saw for the correct purpose and in the manner
described in this instruction manual.
- Excessive feed speed and force on the workpiece during sawing will
quickly damage the saw blade. This may result in a reduction in the
performance of the machine, as well as a reduction in the cutting
accuracy.
- Avoid switching the machine on by accident:the power button must
not be pressed in when the plug is inserted into the wall socket.
- Use the saw blade which is recommended in this manual. This will
ensure the optimal performance of your saw.
- Keep your hands away from the working area when the machine is
in operation.
- Before you carry out any adjustments or servicing work, turn the
device off and remove the mains plug.
5