Artila Matrix-510 Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat Keras Komputer Artila Matrix-510. Artila Matrix-510 17 halaman. Linux arm9 industry box computer

Halaman Cetak

Matrix-510 User Guide

3.10 Factory Default Settings

LAN 1 IP Address: 192.168.2.127

LAN 2 IP Address: DHCP

Password: guest

Supervisor: root (ssh supported)

Password: root

3.11 Network Settings

To configure the IP address, Netmask and Gateway setting, please modify /disk/etc/rc as following:

ifconfig eth0 192.168.2.127 netmask 255.255.255.0

For DHCP setting:

dhcpcd eth1 &

3.12 Wireless LAN Configuration

Matrix-510 supports wireless LAN by using USB WLAN adaptor which uses Ralink RT2570 (rt2570)

/2571 (rt73) controller. Please refer to the website http://ralink.rapla.net for the supporting list of the

USB WLAN adaptor.

To configure the wireless LAN setting, please use command:

modprobe rt73 or modprobe rt2570

ifconfig wlan0 up

iwconfig wlan0 essid XXXX key YYYYYYYY mode MMMM

For infrastructure mode XXXX is the access point name and YYYYYYYY is the encryption key and

MMMM should be managed.

For Ad-Hoc mode mode XXXX is the Matrix-510 device name and YYYYYYYY is the encryption key

MMMM should be ad-hoc.

‧6‧