Artila Matrix-510 사용자 설명서 - 페이지 10

{카테고리_이름} Artila Matrix-510에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Artila Matrix-510 17 페이지. Linux arm9 industry box computer

Matrix-510 User Guide

3.10 Factory Default Settings

LAN 1 IP Address: 192.168.2.127

LAN 2 IP Address: DHCP

Password: guest

Supervisor: root (ssh supported)

Password: root

To configure the IP address, Netmask and Gateway setting, please modify /disk/etc/rc as following:

ifconfig eth0 192.168.2.127 netmask 255.255.255.0

For DHCP setting:

dhcpcd eth1 &

Matrix-510 supports wireless LAN by using USB WLAN adaptor which uses Ralink RT2570 (rt2570)

/2571 (rt73) controller. Please refer to the website http://ralink.rapla.net for the supporting list of the

USB WLAN adaptor.

To configure the wireless LAN setting, please use command:

modprobe rt73 or modprobe rt2570

ifconfig wlan0 up

iwconfig wlan0 essid XXXX key YYYYYYYY mode MMMM

For infrastructure mode XXXX is the access point name and YYYYYYYY is the encryption key and

MMMM should be managed.

For Ad-Hoc mode mode XXXX is the Matrix-510 device name and YYYYYYYY is the encryption key

MMMM should be ad-hoc.

‧6‧