akkuteam VAS 5581 Panduan Petunjuk Pengoperasian - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Alat Ukur akkuteam VAS 5581. akkuteam VAS 5581 17 halaman. Hv measurement adapter
Halaman Cetak
Operating Instructions
HV Measurement Adapter VAS 5581
EMC
In special circumstances, the intended application may be impacted
features
in spite of adhering to the standardized emission threshold values
(e.g. when sensitive equipment is located near the equipment or when
the unit is located in the proximity of radio or television receivers). In
such cases, the operating entity is required to take appropriate steps
to correct the malfunction.
Maintenance
Under normal conditions, the unit requires only a minimum
of care and maintenance. However, it is essential that several issues
and repair
are observed to maintain the operational status over a period of
several years.
– check the power plug and power cable for damage before each
use
– clean the unit with a soft, dry cloth when the housing
surface is soiled
Repair and service work must only be performed by an authorized
service facility. Use only original spare and wear parts (this also
applies to standard components). Components sourced from third
parties may not be designed and manufactured in accordance with
safety requirements.
Do not install other devices in the equipment or make modifications
to the equipment without the manufacturer's approval.
www.akkuteam.de
8
Product
The product warranty period for the unit is 2 years from the date of
warranty
the invoice. However, the manufacturer will not honor the product
and liability
warranty if the damage was caused by one or several of the following:
– use of the equipment in violation of its intended uses
– improper installation and operation
– operating the equipment with defective safety equipment
– non-compliance with the instructions in the operating manual
– unauthorized modifications of the equipment
– catastrophic events due to foreign objects and force majeure
The manufacturer recommends having a safety-technical inspection
Safety-technical
performed on the equipment at least every 12 months.
inspection
We recommend a safety-technical inspection by a certified
electrician
– after modifications
– after installing other components or modifications
– after repairs, service and maintenance
– at least every 12 months.
Conduct the safety-technical inspection in compliance with
the
applicable
directives.
You can obtain more detailed information about the safety-
technical inspection from your electrical testing center, which
will provide you with the required documentation upon request.
national
and
international
standards
9
and
V 1.0