akkuteam VAS 5581 Panduan Petunjuk Pengoperasian - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Alat Ukur akkuteam VAS 5581. akkuteam VAS 5581 17 halaman. Hv measurement adapter
Halaman Cetak
Operating Instructions
HV Measurement Adapter VAS 5581
Safety labeling
Devices with the CE marking meet the basic requirements
of the low-voltage and electro-magnetic compatibility
directive.
Devices marked with this TÜV test seal meet the
requirements of the applicable standards for Canada
and the USA.
Devices marked with this TÜV test seal meet the
requirements of the applicable standards for Japan.
Devices marked with this TÜV seal and the markings
indicated on the rating plate meet the requirements of
the applicable standards for Australia.
Disposal
Do not discard this device in the household waste! As per the
European Directive 2002/96/EC for waste electrical and electronic
devices and its implementation into national law, discarded electrical
devices must be separated and recycled in an environmentally
compatible manner. Ensure that your used equipment is returned
to your dealer or obtain information about a local, authorized
collection and disposal system. Ignoring this EU directive can have
a potentially negative impact on the environment and your health.
Copyright
The copyright to this operating manual remains with the manufac-
turer. The text and figures correspond to the technical status at the
time of printing. Modifications made without notice. The content of
the operating manual establishes no claims of any kind by the buyer.
We appreciate suggestions for improvement and for any errors in the
operating manual.
www.akkuteam.de
10
1.1 Instructions for the manual
State of the art
This HV Measurement Adapter corresponds to the current state of the
art. Proper and safety-conscious operation is required to operate the
device safely.
Read the operating manual
Carefully read the operating manual before using the HV
Measurement Adapter. The operating manual must be observed at all
times.
Action
All actions required to correctly operate the unit are described in the
operating manual and in the referenced documents.
Any other practices not explicitly approved by the manufacturer may
not be employed.
The intended protection may be impaired if the unit is not used
as per the operating manual.
General instructions
Inspections, assembly and repair work may only be performed by
personnel trained by the manufacturer. When malfunctions occur, only
those malfunctions may be corrected in-house that have been marked
for the corresponding maintenance processes in the manufacturer's
training documentation.
11
V 1.0